DOUBLE-SIDED ADHESIVE -SHAPE TAPE-MISTLETOE TUMBLER TUTORIAL! Day 10 of 12 Days of Christmas!

https://youtu.be/Yoy6C4ugnaA

Hey, guys, welcome to day 10 of my 12 Days of Christmas. Today is such a cute little cup. It is my meet me under the mistletoe cup. It's simple yet stunning and festive, and who doesn't love some mistletoe? It's cute. The white has a subtle sparkle, and I used shape tape for the mistletoe. You'll see all that in the video, but I thought it was fun. This is the same brand as my day one stocking cups, and I love the color of the lid. I love these cups; I love them much. So let's get into the tutorial and ensure you come back for day 11 tomorrow.

Starting this cup was a simple pink modern cup with a black lid that I thought would be perfect for my mistletoe cup. Taking off the cover and the packaging and prepping with mattifying, we will spray paint using Rust-Oleum flat white by removing the lid and packaging and preparing with mattifying. I did two perfect coats of this. Finally, we get a pure white base for Wonderland.

Once that was dry, I went on with my first layer of epoxy, using a filter. This is a super fine glitter that is an epoxy additive. If you want a gorgeous all-over Sparkle, this is what you want to use. It's pretty. Look at that sparkle. We'll spread that on the whole cup and look at filter Sparkle. It's so beautiful I. 'm it's one of my favorites. Next, we will cut out our shape tape in the letters, and I will do a red vinyl in an offset. That way, we have the glitter inside the vinyl. It's not like the entire width of it.

I use washi tape settings on my Silhouette, and I go two more on the depth and don't know what to do. I'm cutting out an offset of what I did of the shape tape so that our red vinyl is slightly wider than the shape tape. I weed that out? I do the same thing with the shape tape, but you want to be careful you're peeling off the top and the sticky layer around the words.

We'll weed out the middle of the letters but ensure you get the sticky layer. I'm inside already. We will take the shape tape and place that right on top of the red decals. This is tricky to get off onto the transfer tape. You need to ensure that you're getting the sticky layer off the transfer tape and that it doesn't stay on the backing. I tape down my vinyl, so it's not popping up as it does. I stacked those.

I placed it on the cup at a diagonal I thought it would look adorable like that. Now we're going to pull that. You want to ensure that you remove only the top layer leaving the sticky la. We're going on with Holly glitter. This is pretty red, and this is a tiny cut. I dump it on. I like to move it around with my hand and ensure we get good coverage on the shape tapes. Take a stiff brush and brush the excess off. You'll need to clean out in, like, on the edge of the vinyl. You'll usually get some glitter sticking there. I take one of my needle pens and go in and clean it off. This is all at once. It was all nice and cleaned off. That's my love, true.

I cut out the words meet me under in Black or meet me under the Christmas putting that on right next to the mistletoe decal with the tree. I wanted a little green mistletoe with a red bow. So I cut out red and green of this little decal, and I just cut and peeled off the bow part of the green, the same thing I missed, and peeled off the rest of the red that way.

So I have the red bow and the green mistletoe share this heart again. You could do this like a printable vinyl or a water slide and get like a more realistic-looking mistletoe, but this is what I wanted to do. I thought it'd be cute to take the red bow on some transfer tape and stack it right over the green I can stick to the way it might be crazy right between us with a beautiful, too, cool placing that like it's hanging from the top of the cup.

We're going to seal that, and I did two more layers of epoxy to finish off the cup, and I am using the one-to-one facet from artistry, taking that off the Turner in replacing the lid, and it was done. I love the black cover with this cup. I love the pure white with the red letters and the little pops of glitter on the mistletoe.

It's effortless but beautiful. In this lighting, you don't see the Sparkle from the Filter as much, but in person, you can see that sparkle. That's it for this video. Thank you so much for watching. Make sure you come back for day 11 tomorrow bye, guys, time to set your mind and spirit free, everybody.